Fits models 42A (Hagmann), 42AF (Infinity Axial Flow), 42T (Thayer), 42BO (open wrap) & 36BO (open wrap) New (2013) style case introduced along with the Artisan series tenors. The C1867A is a shaped woodshell case, with a slimmer design that is more compact than traditional rectangular "coffin" cases. Modeled on the design of the early 1920's Bach cases, this case features the familiar brown imitation leather trimmed exterior with brass latches and hinges. Solidly built, this case is easy to c...
Fits models 6, 8, 12, 16 & LT16M New (2013) style case introduced along with the Artisan series tenors. The C1867SA is a shaped woodshell case, with a slimmer design that is more compact than traditional rectangular "coffin" cases. Modeled on the design of the early 1920's Bach cases, this case features the familiar brown imitation leather trimmed exterior with brass latches and hinges. Solidly built, this case is easy to carry, easy to use, and provides lots of protection for your horn. Insid...
Fits models 36 & 42 straight tenors. New (2013) style case introduced along with the Artisan series tenors. The C1867A is a shaped woodshell case, with a slimmer design that is more compact than traditional rectangular "coffin" cases. Modeled on the design of the early 1920's Bach cases, this case features the familiar brown imitation leather trimmed exterior with brass latches and hinges. Solidly built, this case is easy to carry, easy to use, and provides lots of protection for your horn. In...
Original equipment, standard issue case for all late model Conn 88H series trombones, including straight horns (8H); standard wrap (88H); open wrap (88HO); Lindberg valve (88HCL) and others. Fits other makes and models that have similar dimensions to an 88H (Blessing, Shires, Yamaha etc,). Fits all Conn 8H and 88H series instruments. Also fits some other brands with dimensions similar to that of an 88H. Woodshell build with reinforced stitched edges and brass corners. All black with brass...
Lightweight nylon fabric pouch is designed to attach to DAC trumpet and trombone cases. Weighs about 11 ounces (300g) and fits all standard sized music scores up to 9x12 inches.
Category: Trombone Hard Shell Cases Item: 115097 Grade: List Price: $49.95 OUR PRICE: $39.95 Availability: Ships in 90 to 135 Days
The DAC NX-1S trombone case is unique among professional cases in that it is totally customizable inside. With the exception of a wide cradle and a small block to support the slide handle, there are no permanantly affixed structures. All structures—blocks, pads and even the small accessory compartment—are configured by you to best fit your horn. The slide is stored in the base behind the bell in a track, also in a totally customizable arrangement. There is a cover for the open end ...
The DAC NX-1S trombone case is unique among professional cases in that it is totally customizable inside. With the exception of a wide cradle and a small block to support the slide handle, there are no permanantly affixed structures. All structures—blocks, pads and even the small accessory compartment—are configured by you to best fit your horn. The slide is stored in the base behind the bell in a track, also in a totally customizable arrangement. There is a cover for the open end ...
The DAC NX-1S trombone case is unique among professional cases in that it is totally customizable inside. With the exception of a wide cradle and a small block to support the slide handle, there are no permanantly affixed structures. All structures—blocks, pads and even the small accessory compartment—are configured by you to best fit your horn. The slide is stored in the base behind the bell in a track, also in a totally customizable arrangement. There is a cover for the open end ...
The DAC NX-1S trombone case is unique among professional cases in that it is totally customizable inside. With the exception of a wide cradle and a small block to support the slide handle, there are no permanantly affixed structures. All structures—blocks, pads and even the small accessory compartment—are configured by you to best fit your horn. The slide is stored in the base behind the bell in a track, also in a totally customizable arrangement. There is a cover for the open end ...
Innovative hardshell case for cut-bell tenor trombones is in the shape of a violin case. The bell flare stores under cover in the lower bout part of the case while the bell section stores above it in the body. The slide stores in the lid. This is a superlightweight fiberglass hardshell case providing good protection for cut bell instruments. The fit is quite snug, especially for the slide, so be prepared, but it does work well. In the factory images is a Thein trombone. We tested this case with a...
Innovative hardshell case for cut-bell tenor trombones is in the shape of a violin case. The bell flare stores under cover in the lower bout part of the case while the bell section stores above it in the body. The slide stores in the lid. This is a superlightweight fiberglass hardshell case providing good protection for cut bell instruments. The fit is quite snug, especially for the slide, so be prepared, but it does work well. In the factory images is a Thein trombone. We tested this case with a...
A good lightweight case that fits all smaller belled straight trombones. Features: • Hardshell case with 600-Denier nylon cover • Plush-covered dense EPS foam interior • Holds all small and medium bore straight (no F-attachment) trombones • Fits bells sizes up to 8-inches in diameter • Reinforced with nylon webbing • Shoulder strap • No-slip rubber shoulder pad • Interlocking confort grip handle ...
Adagio series Lightweight Case for Trombone F-Attachment • Rigid EPS Design provides a Lightweight and Tough Exterior • Contour Molded Plush-Lined Nest Cradles & Protects Instrument During Transport • Designed to Fit both Straight and F-Attachment Trombones • Discrete Backpack Straps for Convenient Travel • Comfortable Shoulder Strap for Quick On-The-Go Travel • Exterior Pocket for Convenient Storage and Quick Access &bul...
Allegro aeries Pro Bag for Trombone w/F-Attachment • Lightweight Durable Nylon Bag in Professional Black Canvas • Thick Double Banded Cotton Lining Cradles & Protects Instrument During Transport • Designed to Fit Both Straight and Trombone with F-Attachments • Internal Storage Bag for Mouthpiece with External Pocket for Additional Accessories • Comfortable, Interchangeable Backpack or Shoulder Straps for Convenient Travel • ...
Andante series Hardshell Case for Trombone • Durable ABS Design provides a Lightweight and Tough Exterior • Contour Molded Plush-Lined Nest Cradles & Protects Instrument During Transport • Durable Latches with an Attractive Chrome Finishes for a Professional Look • Heavy Duty Aluminum Valance provides a Secure Seal • Comfortable Shoulder Strap for Convenient Travel • Reinforced Handle provides a Comfortable and Secure Feel &...
Andante series Hardshell Case for Trombone F-Attachment • Durable ABS Design provides a Lightweight and Tough Exterior • Contour Molded Plush-Lined Nest Cradles & Protects Instrument During Transport • Durable Latches with an Attractive Chrome Finishes for a Professional Look • Heavy Duty Aluminum Valance provides a Secure Seal • Comfortable Shoulder Strap for Convenient Travel • Reinforced Handle provides a Comfortable an...
Presto series Pro Case for Trombone w/F-Attachment. • Professional-Grade ABS Molded Plastic Shell with Stylish Pewter Finish • Contour Molded Plush-Lined Nest Cradles & Protects Instrument During Transport • Design to Fit Straight and Trombones with F-Attachments • Comfortable, Removable Backpack Straps for Convenient Travel • High Quality Latches with Matte Black Finish for High-End Aesthetic • Sturdy Metal Valance Keeps Cas...
Classic ducktail hardshell case used by the Getzen company for their tenor trombones with F attachments, including the 747, the 1047 (rotary valve), 3047 (axial flow valve), 4047 (Custom Reserve) and 4147 (Ian Bousfield) models. Also fits comparable Edwards models, as well as the T396A Alessi. Fits most other trombones with or without F attachments, open or closed wrap, rotary or axial flow (thayer) valves. Specs: • Black leatherette covered wood panel exterior. • Heavy...
All-fiberglass body complete with back pack straps. Super light and super strong. This is the case used for the entire JPRath line. As both an OEM and aftermarket case, it will fit just about any brand medium or large bore trombone, with or without F attachment. Features: • Fiberglass shell body with nylon fabric covering. • Zipper enclosure. • Padded shoulder strap. • Padded backpack straps. • Removeable dual mouthpiece carrier. &bu...
Original equipment, standard issue case for all late model King 4B and 4BF trombones. Also fits Benge 165F series trombones. Woodshell build with reinforced stitched edges and brass corners. All black with brass colored hardware (latches, hinges, corners & feet). Tapered slimline design. Case is smaller at the tail. Slide stores safely in base portion behind bell section. Enclosure is 3 flip latches. Handles at middle and tail. Black plush lined interior. 2 reinforced mouthpiece cups...
Sleek and compact carbon fiber case designed specifically for and issued with all new small bore 2B and 3B series King trombones (2B, 2B+, 3B, 3BF and 3B+). This case will also fit other makes and models with similar dimensions. The slide is well protected in a lid compartment behind a snap-lock padded baffle. Two small internal compartments hold small accessories, including your mouthpiece. Two detachable straps are provide so that you can carry the case back-pack style or over the shoulder with...
Factory replacement cover for your existing Marcus Bonna single tenor trombone 03/1 Original Model case (the model with room for a straight mute in the bell). Other covers for other Bonna cases available on special order, please inquire. NOTE: Replacement cover requires some modification (cutting) on your part. The leather patches where the metal strap cleats pass through are provided uncut, requiring you to cut them where you wish the cleats to pass through for use with straps. You may also cho...
Factory replacement cover for your existing Marcus Bonna single tenor trombone Light (or Super Light) case. Other covers for other Bonna cases available on special order, please inquire. NOTE: Replacement cover requires some modification (cutting) on your part. The leather patches where the metal strap cleats pass through are provided uncut, requiring you to cut them where you wish the cleats to pass through for use with straps. You may also choose to leave the patches uncut, but then the use of...
The MBT is the original Marcus Bonna trombone case. Like all Bonna cases, it's carefully handmade with a tough fiberglass shell and a durable replaceable nylon cover. The MB Original is special in that it has the capacity to carry a straight mute inserted into the bell, and a trombone stand and sheet music on the outside. The case is a few inches longer than most other models to allow for the mute. It's a nice combination because you don't have to also carry a second bag for your stand, mute a...
The MBT is the original Marcus Bonna trombone case. Like all Bonna cases, it's carefully handmade with an extra tough carbon fiber shell and a durable replaceable nylon cover. The MB Original is special in that it has the capacity to carry a straight mute inserted into the bell, and a trombone stand and sheet music on the outside. The case is a few inches longer than most other models to allow for the mute. It's a nice combination because you don't have to also carry a second bag for your stan...
The Marcus Bonna Baby Case is an innovative compact model for straight (valveless) tenor trombones of all sizes. It features a flat bottom with slide storage below the bell section in the floor of the case. Additional features include a tough fiberglass shell and a durable replaceable nylon cover, and a detachable sheet music & stand carrier. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Flat bottom keeps case from rolling when o...
Compact rigid fiberglass shell case is designed to fit detachable bell instruments with bells up to 9 inches (225mm) in diameter. It has a padded partition in between the slide and the rest of the trombone. The bell is positioned in the lid of the case with attachment supports and elastic belt making it easier to use on a daily basis. The case has one pouch for 2 leadpipes and a front detachable zipper system to attach the included sheet music and accessory carrier. The interior of the case has a...
Compact rigid fiberglass shell case is designed to fit detachable bell instruments with bells up to 9 inches (225mm) in diameter. It has a padded partition in between the slide and the rest of the trombone. The bell is positioned in the lid of the case with attachment supports and elastic belt making it easier to use on a daily basis. The case has one pouch for 2 leadpipes and a front detachable zipper system to attach the included sheet music and accessory carrier. The interior of the case has a...
Similar to the original, traditional Marcus Bonna tenor case, but nearly 6 inches shorter. The exterior shape of the case is unique as there is not a traditional flared end for the bell. Rather, the case gradually widens to accommodate the bell without being obvious. I've heard it said that it looks somewhat like an oversized viola case, which might make it easier to get aboard an aircraft as a carry-on. It will fit nicely in overhead compartments. This is a truly unique design. Inside, the b...
Similar to the original, traditional Marcus Bonna tenor case, but nearly 6 inches shorter. The exterior shape of the case is unique as there is not a traditional flared end for the bell. Rather, the case gradually widens to accommodate the bell without being obvious. I've heard it said that it looks somewhat like an oversized viola case, which might make it easier to get aboard an aircraft as a carry-on. It will fit nicely in overhead compartments. This is a truly unique design. Inside, the b...
Description TBA - This case takes the compact case concept to the extreme by combining the space-saving design of the 03/1C Compact (our 102523) and the cut-bell advantage of the 03/1DB (our 115498) into one model. Additionally, the slide is stored in a separate, detachable carrier, making the bell section's case so compact as to appear as a violin or viola case. Please note that there are three sizes (interior bell lengths) of this case available: 61cm, 67cm and 71cm. This is the 61cm version...
For trombonists with a cut-bell instrument, this is probably the lightest, toughest and most compact case you will see. It is actually two cases combined into one. A compact bell case stores the bell with flare detached, along with all your mouthpieces and small accessories. A rigid slide carrier stores your slide and one or two additional leadpipes. The two parts are joined with a wrap-around zipper that easily connects or detaches the two. The bell section's case is so compact that it looks ...
For trombonists with a cut-bell instrument, this is probably the lightest, toughest and most compact case you will see. It is actually two cases combined into one. A compact bell case stores the bell with flare detached, along with all your mouthpieces and small accessories. A rigid slide carrier stores your slide and one or two additional leadpipes. The two parts are joined with a wrap-around zipper that easily connects or detaches the two. The bell section's case is so compact that it looks ...
Similar to the original, traditional Marcus Bonna tenor case, but nearly 6 inches shorter. Same case as our 102523 but with wheels to make transport easier. The exterior shape of the case is unique as there is not a traditional flared end for the bell. Rather, the case gradually widens to accommodate the bell without being obvious. I've heard it said that it looks somewhat like an oversized viola case, which might make it easier to get aboard an aircraft as a carry-on. It will fit nicely in ov...
This handmade, fiberglass shell case is specifically designed to accommodate those instruments with cut or detachable screw-ring bell flares, such as those made by Courtois, Shires, Thein, Yamaha, Eastman and others. The bell flare, when detached from the rest of the bell section, is stored in the bottom of the case. This makes it possible to have a flat case with no flare at one end, that is also slightly shorter than a typical trombone case. The case is remarkably compact, and might even pas...
This handmade, fiberglass shell case is specifically designed to accommodate those instruments with cut or detachable screw-ring bell flares, such as those made by Courtois, Shires, Thein, Yamaha, Eastman and others. The bell flare, when detached from the rest of the bell section, is stored in the bottom of the case. This makes it possible to have a flat case with no flare at one end, that is also slightly shorter than a typical trombone case. The case is remarkably compact, and might even pas...
The Marcus Bonna Jazz Case is a modern version of the slimline cases of old, though far more protective and convenient. Designed for use with your small or medium bore straight tenor trombone, it features a tough fiberglass shell and a durable replaceable nylon cover, a detachable sheet music & stand carrier. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lockable zipper enclosure (lock not included). Detachable foam blocks (6 ...
The Marcus Bonna Jazz Case is a modern version of the slimline cases of old, though far more protective and convenient. Designed for use with your small or medium bore straight tenor trombone, it features a tough fiberglass shell and a durable replaceable nylon cover, a detachable sheet music & stand carrier. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lockable zipper enclosure (lock not included). Detachable foam blocks (6 ...
The Marcus Bonna Jazz Case is a modern version of the slimline cases of old, though far more protective and convenient. Designed for use with your small or medium bore straight tenor trombone, it features a tough fiberglass shell and a durable replaceable nylon cover, a detachable sheet music & stand carrier. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lockable zipper enclosure (lock not included). Detachable foam blocks (6 ...
This model fits a small bore "jazz" trombone with a bell size up to 8 inches. The slide is attached to the lid with a velcro belt. A hard partition made of foam separates the slide from the main body of the trombone, which lies on top of a compartment space. The bell flare is stored separately next to this compartment. There is space for accessories in the compartment inside or in the exterior detachable sheet music bag. A trombone stand can be attached to the sheet music bag. The case feature...
The handmade Marcus Bonna trombone case consists of a fiberglass shell with a replaceable leather cover. The Light (formerly known as the "Super Light") is a traditional length case with a compact, contoured design, weighing less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Fiberglass shell for strength and damage protection. Replaceable leather outer cover. Lockable zipper enc...
The handmade Marcus Bonna trombone case consists of a fiberglass shell with a durable nylon replaceable cover. The Light (formerly known as the Super Light) is a traditional length case with a compact, contoured design, weighing a half pound less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lock...
The handmade Marcus Bonna trombone case consists of a fiberglass shell with a durable nylon replaceable cover. The Light (formerly known as the Super Light) is a traditional length case with a compact, contoured design, weighing a half pound less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lock...
The handmade Marcus Bonna trombone case consists of a fiberglass shell with a durable nylon replaceable cover. The Light (formerly known as the Super Light) is a traditional length case with a compact, contoured design, weighing a half pound less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lock...
The handmade Marcus Bonna trombone case consists of a fiberglass shell with a durable nylon replaceable cover. The Light (formerly known as the Super Light) is a traditional length case with a compact, contoured design, weighing a half pound less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Fiberglass shell for strength and damage protection. Replaceable nylon outer cover. Lock...
The handmade Marcus Bonna trombone case consists of a strong carbon fiber shell with a durable nylon replaceable cover. The Light (formerly known as the Super Light) is a traditional length case with a compact, contoured design, weighing a half pound less than Bonna's standard case. This is one of the most protective cases on the market and is use by many of the world's top professionals. Features include: Carbon fiber shell for extra strength and damage protection. Replaceable nylon ou...
Fits one tenor trombone and one bass trombone side by side. The handmade Marcus Bonna trombone case consists of a fiberglass shell with a replaceable leather cover. The Tenor/Bass Double is a compact standard length case with a semi-open floorplan interior for maximum flexibility in fitting your instruments. Thisis one of the most protective double cases on the market and is use by many of the world's top professionals. With this design, your tenor and bass trombone are stored with their bell...