| |
Order
Qty |
Description |
List
Price |
OUR
PRICE |
 |
Qty.
|
Bach 1867
Trombone Case
Original equipment Bach case is designed to fit all Bach model 6, 8, 12, 16, 36 or 42 series tenor trombone, valveless or with any factory valve or wrap (except K valve). Also fits some other brands with dimensions similar to that of a Bach. The 1867 is a handsome woodshell case covered in chocolate brown fabric with a heavy zipper enclosure. Inside the case are two mouthpiece holders and a compartment for small accessories. The case's bell flare is built entirely into the lid portion so that the case can sit flat on the floor when opened. A large, full length exterior zipper pocket allows the storage of music or other flat items.
(Ships in 60 to 90 Days)
Item: 41119
|
$371.00 |
$279.95 |
 |
Qty.
|
Bam 3030S Classic
Trombone Case, French Style
One of the lightest cases on the market, the Bam 3030SP tenor trombone case is in the classic shaped "French" design. Unlike traditional woodshell cases, this model is constructed of a solid block of expanded foam covered on the outside in a heavy waterproof nylon. The case is black with a medium sized external carry pouch and attached rings for a standard shoulder strap (included). There's a handle on the end of the case as well as in the traditional spot. Inside, the foam is covered in plush green velvet material. You can store a mouthpiece or two, plus a few small items like a spray bottle, oils etc. This would not be a good case to check as luggage unless you put it into an SKB golf bag carrier or road case, but depending on the plane, it might fit into an overhead compartment. We tested the case with many different models of tenors - small, medium & large, with and without valves and open wraps - and found the fit to be good to very good for each. The slide is held in the lid in a soft,nicely formed area and secured with two lobes of foam, without the use of straps or tiedowns. The bell section rests nicely on the bottom part of the case as would be expected. The bell flare itself is securely cradled all the way around in foam. This case is a good option if you are looking for the protection of a hard case but the lightness and slim profile of a gig bag. Made in France and assembled in the US.
(Ships in 60 to 90 Days)
Item: 34672
|
$412.00 |
$342.00 |
 |
Qty.
|
Bam 4030S SofPack
Trombone Case, French Style
The 4030S SofPack case is in the classic slimline French shape. 39 inches long and weighing only 8.45 pounds (3.82 kilograms), the case is both light and small. Similar to Bam's standard French case, this case is also constructed of a solid block of expanded foam. However, contrary to the "SofPack" name, this case features a semi-rigid shell that is actually quite a bit harder than the standard Bam French model. The exterior is a mix of black and deep gray, and features anchor points for two shoulder straps (included) so that it can be carried over the shoulder or in "backpack" form. Inside, black plush material covers soft foam. The slide is held in the lid in a soft, nicely formed area and secured with two lobes of foam, without the use of straps or tiedowns. The bell section rests nicely on the bottom part of the case as would be expected. The bell flare itself is securely cradled all the way around in foam. A mouthpiece can be stored plus a few small items such as spray bottles, oilsetc. This case is a good option if you are looking for the protection of a hard case but the lightness and slim profile of a gig bag. Fits medium and large bore tenors including those with Thayer valves. Made in France and assembled in the US. Note: Not recommended for travel as airline luggage, however it might fit safely into overhead compartments.
(exterior)
(interior with Bach 42T)
Item: 53412
|
$384.00 |
$320.00 |
 |
Qty.
|
Bam 4030SP SofPack
Trombone Case, French Style w/Pocket
The 4030SP SofPack case is in the classic slimline French shape. 39 inches long and weighing only 9.4 pounds (4.26 kilograms), the case is both light and small. This is the same basic case as Bam's model 4030S (53412) except that this model includes an external pocket for storage of music. This case features a semi-rigid shell in black and deep gray with anchor points for two shoulder straps (included) so that it can be carried over the shoulder or in "backpack" form. Inside, black plush material covers soft foam. The slide is held in the lid in a soft, nicely formed area and secured with two lobes of foam, without the use of straps or tiedowns. The bell section rests nicely on the bottom part of the case as would be expected. The bell flare itself is securely cradled all the way around in foam. A mouthpiece can be stored plus a few small items such as spray bottles, oils etc. This case is a good option if you are looking for the protection of a hard case but the lightness and slim profile of a gig bag. Fits medium and large bore tenors including those with Thayer valves. Made in France and assembled in the US. Note: Not recommended for travel as airline luggage, however it might fit safely into overhead compartments.
(exterior)
(interior with Bach 42T)
Item: 53413
|
$446.00 |
$371.00 |
 |
Qty.
|
Bam 4031S SofPack Jazz
Trombone Case, French Style
This "Jazz" model is designed specifically for small jazz horns. This case is the same in every other regard to the larger 4030S except that it is smaller (35" long and 10.5" across at the bell flare) and lighter at 7.4 pounds (3.36 kilograms). This casefeatures a semi-rigid shell in black and deep gray with anchor points for two shoulder straps (included) so that it can be carried over the shoulder or in "backpack" form. Inside, black plush material covers soft foam. The slide is held in the lid in a soft, nicely formed area and secured with two lobes of foam, without the use of straps or tiedowns. The bell section rests nicely on the bottom part of the case as would be expected. The bell flare itself is securely cradled all the way around in foam. Amouthpiece can be stored plus a few small items such as spray bottles, oils etc. This case is a good option if you are looking for the protection of a hard case but the lightness and slim profile of a gig bag. Fits small and medium bore tenors without F attachments. Made in France and assembled in the US. Note: Not recommended for travel as airline luggage, however it might fit safely into overhead compartments.
(exterior)
(interior with Bach LT16M)
Item: 54633
|
$364.00 |
$305.00 |
| |
Qty.
|
Bam 4031SP SofPack Jazz
Trombone Case, French Style w/Pocket
Same as item 54633 except with an external pocket for the carriag e of music. Fits small and medium bore tenors without F attachments. Made in France and assembled in the US. Note: Not recommended for travel as airline luggage, however it might fit safely into overhead compartments.
(interior with Bach LT16M)
(Ships in 60 to 90 Days)
Item: 54634
|
$414.00 |
$347.00 |
| |
Qty.
|
Cronkhite Double
Trombone Gig Bag - fabric/black
Fits any two tenor trombones, small, medium or large. Instruments are stored side by side with bell flares at opposite ends of the bag. Both are protected by padded disks. Slides are stored together, strapped in a padded carrier that fits between the bell sections. Some players use this model to carry their alto trombone in place of a second tenor. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
 .
(Ships in 14 to 21 Days)
Item: 43214
|
$382.00 |
$286.00 |
| |
Qty.
|
Cronkhite Double
Trombone Gig Bag - fabric/burgundy
Fits any two tenor trombones, small, medium or large. Instruments are stored side by side with bell flares at opposite ends of the bag. Both are protected by padded disks. Slides are stored together, strapped in a padded carrier that fits between the bell sections. Some players use this model to carry their alto trombone in place of a second tenor. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43215
|
$382.00 |
$286.00 |
| |
Qty.
|
Cronkhite Double
Trombone Gig Bag - leather/black
Fits any two tenor trombones, small, medium or large. Instruments are stored side by side with bell flares at opposite ends of the bag. Both are protected by padded disks. Slides are stored together, strapped in a padded carrier that fits between the bell sections. Some players use this model to carry their alto trombone in place of a second tenor. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43216
|
$650.00 |
$399.95 |
| |
Qty.
|
Cronkhite Double
Trombone Gig Bag - leather/brown
Fits any two tenor trombones, small, medium or large. Instruments are stored side by side with bell flares at opposite ends of the bag. Both are protected by padded disks. Slides are stored together, strapped in a padded carrier that fits between the bell sections. Some players use this model to carry their alto trombone in place of a second tenor. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43217
|
$650.00 |
$479.00 |
| |
Qty.
|
Cronkhite Double
Trombone Gig Bag - leather/burgundy
Fits any two tenor trombones, small, medium or large. Instruments are stored side by side with bell flares at opposite ends of the bag. Both are protected by padded disks. Slides are stored together, strapped in a padded carrier that fits between the bell sections. Some players use this model to carry their alto trombone in place of a second tenor. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43218
|
$650.00 |
$479.00 |
 |
Qty.
|
Cronkhite Double XL
Trombone Gig Bag - fabric/black
Fits a tenor and bass trombone (max 10 inch bell) side by side. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you. .
Item: 43230
|
$480.00 |
$360.00 |
| |
Qty.
|
Cronkhite Double XL
Trombone Gig Bag - leather/black
Fits a tenor and bass trombone (max 10 inch bell) side by side. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you. .
Item: 43231
|
$660.00 |
$429.00 |
 |
Qty.
|
Cronkhite Flight
Trombone Gig Bag, Medium - fabric/black
Innovative design allows your trombone to be carried aboard aircraft as a personal carry-on when you travel, instead of being stowed below as luggage. The bag is actually in two separate parts—a bag for the bell and a reinforced slide carrier. The slide carrier is little larger than your slide, board reinforced on both sides and fits all sizes of slides from small tenor to bass. The bell unit is sized for your horn (small, medium or large) and is about the size of a bass trumpet case. It features the same bell end plate and padded kit pouch as other Cronkhite models. The two parts are held firmly together with snaplinks and can be quickly detached at the airport gate to be carried aboard the plane. The assembled case stands up fine on the bell end, and is stable in the horizontal position so it won't roll while you're loading or unloading your horn. The universal slide carrier attaches to all three of the bell cases. So, you can use the same carrier and purchase additional bell bags for your other horns (see items 56696 through 56701 for a selection). This Medium bag fits large tenors with bells from 8.5" to 9" in diameter.
(complete setup)
(interior of slide carrier)
Item: 56693
|
$440.00 |
$349.00 |
| |
Qty.
|
Cronkhite Flight
Trombone Gig Bag, Medium - leather/black
Innovative design allows your trombone to be carried aboard aircraft as a personal carry-on when you travel, instead of being stowed below as luggage. The bag is actually in two separate parts—a bag for the bell and a reinforced slide carrier. The slide carrier is little larger than your slide, board reinforced on both sides and fits all sizes of slides from small tenor to bass. The bell unit is sized for your horn (small, medium or large) and is about the size of a bass trumpet case. It features the same bell end plate and padded kit pouch as other Cronkhite models. The two parts are held firmly together with snaplinks and can be quickly detached at the airport gate to be carried aboard the plane. The assembled case stands up fine on the bell end, and is stable in the horizontal position so it won't roll while you're loading or unloading your horn. The universal slide carrier attaches to all three of the bell cases. So, you can use the same carrier and purchase additional bell bags for your other horns (see items 56696 through 56701 for a selection). This Medium bag fits large tenors with bells from 8.5" to 9" in diameter.
(complete setup)
(interior of slide carrier)
(Ships in 14 to 21 Days)
Item: 56692
|
$622.00 |
$459.00 |
| |
Qty.
|
Cronkhite Flight
Trombone Gig Bag, Small - fabric/black
Innovative design allows your trombone to be carried aboard aircraft as a personal carry-on when you travel, instead of being stowed below as luggage. The bag is actually in two separate parts—a bag for the bell and a reinforced slide carrier. The slide carrier is little larger than your slide, board reinforced on both sides and fits all sizes of slides from small tenor to bass. The bell unit is sized for your horn (small, medium or large) and is about the size of a bass trumpet case. It features the same bell end plate and padded kit pouch as other Cronkhite models. The two parts are held firmly together with snaplinks and can be quickly detached at the airport gate to be carried aboard the plane. The assembled case stands up fine on the bell end, and is stable in the horizontal position so it won't roll while you're loading or unloading your horn. The universal slide carrier attaches to all three of the bell cases. So, you can use the same carrier and purchase additional bell bags for your other horns (see items 56696 through 56701 for a selection). This Small bag fits small and medium tenor trombones with bells up to 8" in diameter.
(complete setup)
(interior of slide carrier)
(Ships in 14 to 21 Days)
Item: 56691
|
$438.00 |
$328.00 |
| |
Qty.
|
Cronkhite Flight
Trombone Gig Bag, Small - leather/black
Innovative design allows your trombone to be carried aboard aircraft as a personal carry-on when you travel, instead of being stowed below as luggage. The bag is actually in two separate parts—a bag for the bell and a reinforced slide carrier. The slide carrier is little larger than your slide, board reinforced on both sides and fits all sizes of slides from small tenor to bass. The bell unit is sized for your horn (small, medium or large) and is about the size of a bass trumpet case. It features the same bell end plate and padded kit pouch as other Cronkhite models. The two parts are held firmly together with snaplinks and can be quickly detached at the airport gate to be carried aboard the plane. The assembled case stands up fine on the bell end, and is stable in the horizontal position so it won't roll while you're loading or unloading your horn. The universal slide carrier attaches to all three of the bell cases. So, you can use the same carrier and purchase additional bell bags for your other horns (see items 56696 through 56701 for a selection). This Small bag fits small and medium tenor trombones with bells up to 8" in diameter.
(complete setup)
(interior of slide carrier)
Item: 56690
|
$618.00 |
$459.00 |
 |
Qty.
|
Cronkhite Flight
Trombone Slide Carrier only - fabric/black
Universal slide carrier fits all tenor and bass trombone slides. Use with the bell case sized correctly for your instrument. See items 56696 through 56701 for a selection of bell cases.
(exterior)
(interior)
Item: 56703
|
$199.00 |
$155.00 |
| |
Qty.
|
Cronkhite Flight
Trombone Slide Carrier only - leather/black
Universal slide carrier fits all tenor and bass trombone slides. Use with the bell case sized correctly for your instrument. See items 56696 through 56701 for a selection of bell cases.
(exterior in fabric)
(interior)
(Ships in 14 to 21 Days)
Item: 56702
|
$260.00 |
$181.95 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Jazz Tenor - fabric/black
Similar to the Cronkhite Small bag, (our item 43226), this bag is even more narrow and light. It is intended for straight (no F attachment) small bore jazz tenors with bells up to 8 inches in diameter. Handmade to order in the United States. Please allowadditional time for manufacture and delivery to you.
Item: 56718
|
$270.00 |
$189.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Jazz Tenor - leather/black
Similar to the Cronkhite Small bag, (our item 43224), this bag is even more narrow and light. It is intended for straight (no F attachment) small bore jazz tenors with bells up to 8 inches in diameter. Handmade to order in the United States. Please allowadditional time for manufacture and delivery to you.
(Ships in 14 to 21 Days)
Item: 56719
|
$424.00 |
$299.95 |
 |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Medium - fabric/black
Fits all large bore (0.547") "Symphony" trombones with bells up to 9 inches, and most single valve basses with bells up to 9.5 inches in diameter. Also fits medium and small bore horns, but much more loosely. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
Item: 43219
|
$326.00 |
$244.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Medium - fabric/burgundy
Fits all large bore (0.547") "Symphony" trombones with bells up to 9 inches, and most single valve basses with bells up to 9.5 inches in diameter. Also fits medium and small bore horns, but much more loosely. Fits any valve style or wrap. If this model is out of stock, it will be promptly ordered and handmade for you in the United States.
.
(Ships in 14 to 21 Days)
Item: 43220
|
$326.00 |
$244.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Medium - leather/black
Fits all large bore (0.547") "Symphony" trombones with bells up to 9 inches, and most single valve basses with bells up to 9.5 inches in diameter. Also fits medium and small bore horns, but much more loosely. Fits any valve style or wrap. If this model is out of stock, it will be promptly ordered and handmade for you in the United States.
.
(Ships in 14 to 21 Days)
Item: 43221
|
$462.00 |
$345.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Medium - leather/brown
Fits all large bore (0.547") "Symphony" trombones with bells up to 9 inches, and most single valve basses with bells up to 9.5 inches in diameter. Also fits medium and small bore horns, but much more loosely. Fits any valve style or wrap. If this model is out of stock, it will be promptly ordered and handmade for you in the United States.
.
(Ships in 14 to 21 Days)
Item: 43222
|
$462.00 |
$339.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Medium - leather/burgundy
Fits all large bore (0.547") "Symphony" trombones with bells up to 9 inches, and most single valve basses with bells up to 9.5 inches in diameter. Also fits medium and small bore horns, but much more loosely. Fits any valve style or wrap. If this model is out of stock, it will be promptly ordered and handmade for you in the United States.
.
Item: 43223
|
$462.00 |
$346.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Small - fabric/black
Small sized bag fits all small and medium bore tenor trombones with bells up to 8 inches in diameter. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43224
|
$284.00 |
$213.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Small - fabric/burgundy
Small sized bag fits all small and medium bore tenor trombones with bells up to 8 inches in diameter. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43225
|
$284.00 |
$213.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Small - leather/black
Small sized bag fits all small and medium bore tenor trombones with bells up to 8 inches in diameter. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43226
|
$434.00 |
$325.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Small - leather/brown
Small sized bag fits all small and medium bore tenor trombones with bells up to 8 inches in diameter. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
Item: 43227
|
$434.00 |
$325.00 |
| |
Qty.
|
Cronkhite G Style
Trombone Gig Bag, Small - leather/burgundy
Small sized bag fits all small and medium bore tenor trombones with bells up to 8 inches in diameter. Fits any valve style or wrap. Handmade to order in the United States. Please allow additional time for manufacture and delivery to you.
.
(Ships in 14 to 21 Days)
Item: 43228
|
$434.00 |
$325.00 |
| |
Qty.
|
Cronkhite TBN-ALT-C
Alto Trombone Gig Bag - fabric/black
(Ships in 14 to 21 Days)
Item: 56932
|
$270.00 |
$189.00 |
| |
Qty.
|
Cronkhite TBN-ALT-L
Alto Trombone Gig Bag - leather/black
(Ships in 14 to 21 Days)
Item: 56931
|
$380.00 |
$279.00 |
| |
Qty.
|
Cronkhite TBN-BTV-C
Valve Trombone Gig Bag - fabric/black
Item: 18047
|
$318.00 |
$238.00 |
| |
Qty.
|
Cronkhite TBN-BTV-L
Valve Trombone Gig Bag - leather/black
(Ships in 14 to 21 Days)
Item: 18048
|
$472.00 |
$349.00 |
| |
Qty.
|
Cronkhite TBN-DBV-C
Valve Trombone Gig Bag w/Slide - fabric/black
(Ships in 14 to 21 Days)
Item: 18481
|
$368.00 |
$257.95 |
| |
Qty.
|
Cronkhite TBN-DBV-L
Valve Trombone Gig Bag w/Slide - leather/blk
(Ships in 14 to 21 Days)
Item: 18482
|
$572.00 |
$399.95 |
 |
Qty.
|
Diversified Tank NEW ITEM!
Alto Trombone Case, Road/Flight
Finally, an affordable, highly protective road/flight case for your alto trombone. The Tank is unlike anything currently on the market. It's engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers.
Damage happens in almost every instance when your sax continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Spring loaded snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 28 x 13 x 8.5 inches.
- Weight is approx 12 pounds.
- Made in the United States by US citizens.
(Ships in 10 to 15 Days)
Item: 75695
|
$675.00 |
$335.00 |
| |
Qty.
|
Diversified Tank
Cimbasso Case, Road/Flight
Finally, an affordable, highly protective road/flight case for your cimbasso. The Tank is unlike anything currently on the market. They are engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 22 x 12 inches.
- Made in the United States by US citizens.
(Ships in 10 to 15 Days)
Item: 71825
|
$975.00 |
$649.00 |
| |
Qty.
|
Diversified Tank
Contrabass Trombone Case, Road/Flight
Finally, an affordable, highly protective road/flight case for your contrabass trombone. The Tank is unlike anything currently on the market. They are engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 44 x 17 x 12 inches.
- Made in the United States by US citizens.
(Ships in 10 to 15 Days)
Item: 71823
|
$999.00 |
$769.00 |
| |
Qty.
|
Diversified Tank
Trombone Case Carrier Shell
Designed for those who wish to keep their horn in their existing gig bag or compact case. Place your case/bag into the shell for extra protection. While perhaps not providing the same protection aginst internal whiplash as full featured Tank cases, this Tank Shell will certainly give more protection than you're getting with your current case or bag. The Shell has similar features as full fledged Tank models, including: - Strong aluminum case with radiused corners and ABS side panels.
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Shape doesn't give away what's inside.
- Dimensions are 40 x 12 x 12 inches.
- Interior Dimensions are 39.5 x 11.5 x 11.5 inches.
- Weighs just 16 pounds.
- Made in the United States by US citizens.
(Ships in 10 to 15 Days)
Item: 71832
|
$389.00 |
$259.00 |
 |
Qty.
|
Diversified Tank
Trombone Case, Double Alto/Tenor
Finally, an affordable, highly protective road/flight case for your horns. The Tank is unlike anything currently on the market. It's engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers. This case is designed to hold a tenor trombone and an alto trombone side by side.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 21 x 9.5 inches.
- Made in the United States by US citizens.
(double tenor case shown)
(Ships in 10 to 15 Days)
Item: 71821
|
$798.00 |
$532.00 |
| |
Qty.
|
Diversified Tank
Trombone Case, Double Tenor
Finally, an affordable, highly protective road/flight case for your horns. Designed to carry two tenor trombones—either large bore with F attachment or straight small/medium bore without. The Tank is unlike anything currently on the market. It's engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers. This case is designed to hold two tenor trombones, one with an F attachment and one without.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instruments and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 22.5 x 9.5 inches.
- Made in the United States by US citizens.
(Ships in 10 to 15 Days)
Item: 71820
|
$799.00 |
$539.00 |
| |
Qty.
|
Diversified Tank
Trombone Case, Double Tenor/Bass
Finally, an affordable, highly protective road/flight case for your babies. The Tank is unlike anything currently on the market. It's engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers. This case is designed to hold a tenor trombone and a bass trombone side by side.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 25 x 12 inches.
- Made in the United States by US citizens.
(double tenor case shown)
(Ships in 10 to 15 Days)
Item: 71822
|
$950.00 |
$625.00 |
 |
Qty.
|
Diversified Tank
Trombone Case, Road/Flight
Finally, a Trombone Flight Case! After many years searching, and fruitless efforts to have our own flight designs built, we have discovered The Tank. The Tank is unlike anything currently on the market. It's engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers. Yet the case is lightweight and compact, coming in just over 18 pounds (8.25 kilos). Size-wise it is a little larger than the King box cases of old. --cdp Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with. Made of aluminum with ABS plastic sides and an array of foam which is die-cut to fit the instrument. The tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. -the manufacturer. Features include: - Fits all straight tenors, small medium & large bore.
- Fits all tenors with F attachments, small, medium & large bore.
- Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam fits your instrument and eliminates movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Spring loaded steel handles stay close to the body, reducing the possibility of snagging on other luggage.
- Low profile, twist-type industrial latches are tapered to reduce chances of damage or snagging in flight.
- Latches are non-locking to conform with ATA regulations for checked baggage.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Lightweight compared to most other hard cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 12 x 9.5 inches.
- Weighs just 18 pounds.
- Made in the United States by US citizens.
.
(Ships in 10 to 15 Days)
Item: 69589
|
$500.00 |
$335.00 |
 |
Qty.
|
Diversified Tank
Trombone Case, Triple Alto/Tenor/Bass
Finally, an affordable, highly protective road/flight case for your trio of trombones. This case is designed to hold an alto, tenor and bass trombone together, side by side. The Tank is unlike anything currently on the market. It is engineered to provide maximum protection against drops, bangs and rough handling by baggage handlers.
Damage happens in almost every instance when an instrument continues to move when the case it is in stops abruptly. We like to call it "interior whiplash." The Tank case makes sure that the instrument never even knows it was moving to begin with.
The Tank is made of aluminum with ABS plastic sides and an array of foam die-cut to fit the instrument. The Tank cradles your instrument in an incredibly effective cocoon of protection. This may be the first light-weight case ever that you can feel comfortable handing over to an airline baggage team, because you know you get that instrument back at the other end in exactly the same condition as it left your hands. Features include: - Strong aluminum case with radiused corners and ABS side panels.
- Die-cut foam to fit your instrument and eliminate movement.
- Interior sealed storage space (nothing gets loose to move on its own).
- Wheels and balancing feet for safe & easy transport.
- Snap handles stay close to he body for less chance of breakage.
- Low profile latches reduce chances of damage or snagging in flight.
- Full-length piano hinge helps increase durability, seal and alignment of top and bottom.
- Tongue-and-groove enclosure maintains seal and alignment.
- Exterior "D" rings to attach a strap (sold separately).
- Light weight compared to most other cases.
- Shape doesn't give away what's inside.
- Dimensions are 38 x 34 12 inches.
- Made in the United States by US citizens.
Item: 71824
|
$1275.00 |
$849.00 |
 |
Qty.
|
Eastman
Trombone Case, Fiberglass - black metallic
Sturdy fiberglass case with reinforced waterproof valence, high quality latches and handle, interior instrument-suspension design and padded shoulder strap. Fits most instruments, including those with F attachments and open wrap valve sections. Will not fit instruments with Thayer, Lindberg, Yamaha 682B or Shires TruBore valves. Weighs just 7.75 pounds (3.5 kg). Exterior dimensions are 36.5" x 10.5" x 10.5" (93 x 27 x 27cm). Interior will accomodate an instrument with up to a 8.5" (216mm) diameter bell.
(interior view)
(exterior view)
Item: 58718
|
$246.00 |
$219.00 |
 |
Qty.
|
Eastman
Trombone Case, Fiberglass - blue
Sturdy fiberglass case with reinforced waterproof valence, high quality latches and handle, interior instrument-suspension design and padded shoulder strap. Fits most instruments, including those with F attachments and open wrap valve sections. Will not fit instruments with Thayer, Lindberg, Yamaha 682B or Shires TruBore valves. Weighs just 7.75 pounds (3.5 kg). Exterior dimensions are 36.5" x 10.5" x 10.5" (93 x 27 x 27cm). Interior will accomodate an instrument with up to a 8.5" (216mm) diameter bell.
(interior view)
(exterior view)
(Ships in 10 to 15 Days)
Item: 58721
|
$246.00 |
$219.00 |
 |
Qty.
|
Eastman
Trombone Case, Fiberglass - forest green
Sturdy fiberglass case with reinforced waterproof valence, high quality latches and handle, interior instrument-suspension design and padded shoulder strap. Fits most instruments, including those with F attachments and open wrap valve sections. Will not fit instruments with Thayer, Lindberg, Yamaha 682B or Shires TruBore valves. Weighs just 7.75 pounds (3.5 kg). Exterior dimensions are 36.5" x 10.5" x 10.5" (93 x 27 x 27cm). Interior will accomodate an instrument with up to a 8.5" (216mm) diameter bell.
(interior view)
(exterior view)
(Ships in 10 to 15 Days)
Item: 58723
|
$246.00 |
$219.00 |
 |
Qty.
|
Eastman
Trombone Case, Fiberglass - red
Sturdy fiberglass case with reinforced waterproof valence, high quality latches and handle, interior instrument-suspension design and padded shoulder strap. Fits most instruments, including those with F attachments and open wrap valve sections. Will not fit instruments with Thayer, Lindberg, Yamaha 682B or Shires TruBore valves. Weighs just 7.75 pounds (3.5 kg). Exterior dimensions are 36.5" x 10.5" x 10.5" (93 x 27 x 27cm). Interior will accomodate an instrument with up to a 8.5" (216mm) diameter bell.
(interior view)
(exterior view)
(Ships in 10 to 15 Days)
Item: 58719
|
$246.00 |
$219.00 |
