This new model has a deep, S-Series (SLAP!) cup. It provides a huge volume and depth of sound with an immediate, fast response. This mouthpiece was designed for our good friend Ed Cord, Professor of Trumpet at Indiana University. - the manufacturer Specifications: • Blank: heavy STC-1 (STC) • Outside Rim Diameter: 1.080 inches (27.432mm) • Outside Rim Contour: round • Rim Highpoint Diameter: 0.854 inches (21.69mm) • Inside Rim Diamet...
We've had many requests over the years for B1-1 series mouthpieces with more shallow cups. This model has turned out to be one of the most successful designs we have ever produced! It has the same approximate cup depth as our very popular B1-5 and B1-2 mouthpieces, with a uniquely shaped "SLAP" cup. Very popular with Symphony players who are looking for a more efficient version of a B1-1. - the manufacturer Specifications: • Blank: heavy STC-1 (STC) • Outside Rim Diame...
This mouthpiece has a shallow cup to begin with, and due to the very round contour of the B1-1 rim, it feels even more shallow than it looks! If you have relatively thin chops and/or you usually don't bottom out on shallow cup mouthpieces, this model used on Bb trumpet or piccolo trumpet will give you high notes all day long. - the manufacturer Specifications: • Blank: heavy STC-1 (STC) • Outside Rim Diameter: 1.080 inches (27.432mm) • Outside Rim Contour: r...
With a deep, bowl-shaped cup, this mouthpiece allows the player to produce a large, robust sound. It has the flattest rim, with the most bite, of any of the B1 series mouthpieces. Very popular with orchestral players all over the world. Used by Dave Tasa, principal trumpet of the Frankfurt Opera. - the manufacturer Specifications: • Blank: heavy STC-1 (STC) • Outside Rim Diameter: 1.080 inches (27.432mm) • Outside Rim Contour: sharp • Rim Highpo...
With a slightly shallow "Slap" cup, this model feels about the same depth as our deeper lead trumpet mouthpieces such as the B4LD. While the physical depth from the high point of the rim is actually closer to a B2 (see chart), the unusually round B1-1 rim (which curves very far down into the cup) makes the mouthpiece feel and play like a more shallow mouthpiece. The end result is a mouthpiece that is almost impossible to "bottom out" on, but still helps produce a huge lead trumpet sound, with a v...
MF II The MF II was Maynard Ferguson's first radical change in mouthpiece rim and cup design in over 20 years. Dave Monette worked personally with Maynard to develop the design. The result is an unusually easy-to-play, mainstream (pun intended) lead mouthpiece that has a huge sound. It "slots" almost like a classical mouthpiece! If you have ever tried our classic BL2 design, then imagine the same basic mouthpiece with a bigger sound and larger targets for an even more forgiving, stable response. ...
The largest mouthpiece in our Silver series is our Monette 1. It has the same rim contour of the Monette 2, but in a larger diameter. It compares to the old fashioned 1C size, and is popular among orchestral players. For strong players looking for a bigger sound, or anyone who is most comfortable on a larger mouthpiece size, this is a great choice with a much easier upper register than conventional large diameter mouthpieces. - the manufacturer About the Silver series: These silver plated produ...
The Monette 2 has the exact same rim diameter and cup as our very popular B2S3, and it compares to an old fashioned 1 1/4 C size. This mouthpiece is great for more advanced players who are used to a larger mouthpiece and looking for a bigger sound and easier upper register, not to mention greatly improved intonation! About the Silver series: These silver plated production mouthpieces are the most economical mouthpieces we have ever made. They are available in our four most popular rim sizes, an...
This compares to the 1 1/2 C size, and is a great step up for people who are beginning to outgrow (or out-BLOW!) the smaller MONETTE 6 mouthpiece. The rim and cup profiles are based on our B2S3, and it is great for all around playing. About the Silver series: These silver plated production mouthpieces are the most economical mouthpieces we have ever made. They are available in our four most popular rim sizes, and offer a huge improvement in sound, dynamic range and intonation over any conventio...
This is the first size we made available in November of 2011, and it compares to the common 3C size. It is the exact same rim and cup as our popular B6S1, which is great for professionals who need an all-around mouthpiece, beginners, come-back players and anyone who would otherwise be using conventional 7C, 5C or 3C sizes. About the Silver series: These silver plated production mouthpieces are the most economical mouthpieces we have ever made. They are available in our four most popular rim siz...
The new Lead mouthpiece by Monette. About the Silver series: These silver plated production mouthpieces are the most economical mouthpieces we have ever made. They are available in our four most popular rim sizes, and offer a huge improvement in sound, dynamic range and intonation over any conventional mouthpiece.Put one of these in virtually any brand of trumpet - even C, D and Eb trumpets - and feel and hear how much easier trumpet playing should be! All Monette silver mouthpieces are made on...